N1MM VK UDC's

Page updated 11 MAY 2019

N1MM LOGGER - User Defined Contests

For those who like N1MM as a logger program, I have written User Defined Contest loggers for:

  • VK Trans Tasman Low Band Challenge | New rule structure for 2015 | MUST read PDF first.
  • John Moyle Field Day - A must for the HF only Multi-multi portable contesters as it keeps the
    logs in order in a networked environment. Also good for the HF Single Op Portable. New update 4/4/2018
  • VK QRP Hours contest - There was no logger to cater for this contest, but now there is!
  • Harry Angel Memorial Sprint
  • Remembrance Day Contest. Please Read PDF First!!.
  • VK Shires- for non rovers. Please read PDF file for installation.
  • ZL Memorial - New 5/7/2018 - under test feedback appreciated.

Do not modify the files in anyway, including their file name.

N1MM is fairly complex, and if you have never used it before then RTFM. (Read Quick start guide).
One must set N1MM up correctly and have the latest version of N1MM Plus for the UDC's to work correctly.

N1MM LOGGER - How to setup VK UDC's for VK contests.

A step by step guide from downloading to installing the UDC Files

  • 1. Download the UDC from above links - if there is a PDF, then read it first.
  • 2. Unzip the file and open in windows explorer as you will need to copy them to folders
  • 3. Copy the UDC file to My Documents/N1MM Logger+/UserDefinedContests.
  • 4. If there is a vkzl_cty.dat file or similar, then copy to MY Documents/N1MM Logger+/SupportFiles
  • 5. Open N1MM Logger+. Click on File-New Log in Database:
  • 6. Scroll through the listed contests and select the one you have just installed.
  • 7. If it is not showing then you have not copied the contest UDC to the correct folder.
  • 8. Finish selecting the relevant options for the contest.
  • 9. If there was a vk .dat file, it will need to be loaded for N1MM to score correctly
  • 10. Click on Tools - Import country list from downloaded file...
  • 11. Select vkzl_cty.dat file and click Open
  • 12. Remember to switch back to wl_cty.dat the next time you use N1MM for a non VK contest.

N1MM LOGGER - How to setup Waterfall Band Map.

  • 1. In Config - Broadcast Tab:
  • 2. Check the Radio Checkbox and add 127.0.0.1:13063 (put a comma after each entry)
  • 3. Check the Spots Checkbox and add 127.0.0.1:13063
  • 4. If using SO2R Configure Radio 2 as 127.0.0.1:13065 in additon to 13063
  • to both Radio and Spots addresses.
  • 5. Connect to the cluster for spots to show.
tumblr hit counter